Take brief look at just a few of the installations where the Moist///Scan® technology has been implemented.

Moist///Scan has its largest install base within the Coal sector. From mines, washplants, power plants and steel works. Many other industries also employ the use of Moist///Scan in various stages of their process.

The MOIST///SCAN^® MA-500  has proven to be very compatible with applications within the
 alumina making process, from mining of bauxite to the production of alumina.  Typically the
 MOIST///SCAN^® MA-500 obtains an instrument accuracy of 0.3% for products such as  alumina hydrate.

An exhaustive program involving comparative analysis of in excess of 300 physical samples
was performed to verify the effectiveness of a MOIST///SCAN^® MA-500HDi analyzer.
The analyzer was proven to have an accuracy of approximately 0.6% total moisture
with an average product bed depth of 350mm over a moisture range of 8.0% to 14%.

BAGASSE

Clients involved with the MOIST///SCAN^® MA-500 currently include the Sugar Research
Institute (Australia), and the Racecourse Mill ( owned by Mackay Sugar). 

The MOIST///SCAN^® MA-500 is installed either after the crushers or after de-watering
of bagasse, before it is fed to the boiler. 
 

NICKEL ORE  

Clients utilizing Moist///Scan for nickel ore moisture control currently include, SLN Nickel (New Caledonia) , Votorantin Metatis (Brazil) and BHP Billiton.  The QNI staff use the analyzer constantly for metallurgical accounting.