MA-100 Bench-top Moisture Meter

Designed to enable site operators to take grab samples and get an instant moisture measurement.  The MA-100 bench-top moisture meter is ideally suited to batch type operations and installations where it is not practical to install an on-line solution.  It's as easy as filling the bucket with a sample, selecting the desired calibration and reading a result in less than a couple of minutes.

 

The MA-100 is suitable for use on the majority of bulk materials spanning the mining, mineral processing, food, building materials, and agriculture.

Typical uses include:
•      Measuring moisture in stockpiles such as coal, nickel ore,  
         bagasse and woodchip
•      Measuring filter cake moisture in minerals 
•      Spot checking moistures in truckloads and shiploads of grains and other agricultural
         products
•      At line sampling of food products in blenders and mixers

The MA-100 is fully integrated into a pelican case and incorporates the following features.

•      A large 3 litre bucket ensures representative sample
•      Simply pressing a button will give you the moisture result in less than 10 seconds
•      User friendly display makes calibration easy
•      Can hold up to 10 calibrations for different product types
•      USB and Ethernet for connection to PC
•      Battery powered for use in the field

The benefit of the MA-100 over traditional bench top moisture analysers is:

•    The sample analysed is hundreds of times larger hence much more 
      representative – the MA-100 takes a sample of 1-3 litres.  This    
      compares with a traditional lab analyses or less then 5ml
•    The result is instantaneous – the MA-100 takes returns a moisture 
      result in less than 20 seconds.  Traditional oven dried moisture methods can  
      takes hours and halogen moisture drying analyser take up to 10 minutes.  

Measured Constituents:		Up to 3 simultaneously
Moisture Range:		Min. 0.1%, Max. 95%
Protein Range :		Application dependant.
Fats / Oils Range:  Accuracy		Application dependant Moisture accuracy   0.1% ( @ 1 std dev) - application dependant.
Operating  Frequency:		Multiple  / Broadband
Operating Temp:		10-40°C (50-100°F)
Calibration Codes:		20, unlimited with computer
Test Duration:		Fully selectable. Normally  6 0 seconds
Power:		90-260VAC 50/60 Hz, 85 watts
Outputs:		RS232 and RS485 , optional ethernet
Dimensions:		(LxWxH),  600  x  400  x  350  mm
Weight:		( 21.5 kg)

 

                 

MA-100 Bulk Sample                                      Inside the MA-100 suitcase                                    The MA-100 suitcase

Portable Analyser

Download brochure

Have your application assessed

Contact us for more information